White vinyl pro-cut on liner with clear premask. Overall size 7.5x5” – Individual phrases will vary.
Prepare the surface by washing with a mild soap and water solution. Do not use soaps or detergents that contain creams or lotions. Once the surface is free of dirt and oils, dry thoroughly with a lint free cloth.
It is recommended that the air and application surface temperatures are both a minimum of 50° (F).
If the surface is freshly painted, please allow for proper curing of paint before applying the vinyl cut decals.
Step 1: Lay decal, FACE UP on a smooth hard surface. Use included squeegee the surface to insure good contact between the pre-mask and the vinyl beneath it.
Step 2: Lay decal flat, FACE DOWN. Slowly remove backing paper from the pre-mask, pulling straight back and flat as shown (not at an angle).
Step 3: Apply pressure-sensitive vinyl to prepared surface, then squeegee pre-mask surface using overlapping strokes.
Step 4: To expose product, pull premasking away at an angle using a continuous motion. If bubbles occur in the letters, simply prick with a needle and smooth. Do not use a knife or razor.
*Warning: These decals are considered permanent.